SignaMax 065-1895 series Specifications download pdf (Page 5)

065-1895 series Hardened Media Converter

User’s Manual 5

One-Channel Media Converter

Ports

The Converter provides one copper port and one fiber port. The fiber port

provides options of Multi-mode fiber or Single-mode fiber using an SC

connector.

The copper port uses RJ-45 connector, auto-MDIX, and auto negotiates.

Port Settings

Port settings are made very simple by means of a DIP (Dual Inline

Package) switch on the front panel of the hardened media converter.

Default DIP switch settings:

1 2 3 4 1

DIP Switch

There are four pins on the DIP switch for port settings. Refer to the table below for more

details.

DIP switch No. 0 1

1 Disable Link Fault Signaling Enable Link Fault Signaling

2 Enable auto negotiation for

fiber port

Enable forced mode for fiber

port

3 Disable link down alarm for

copper port

Enable link down alarm for

copper port

4 Disable link down alarm for

fiber port

Enable link down alarm for fiber

port

1 2 3 4 5 6 7 8 9 10

No comments

SignaMax 065-1895 series Specifications Page 5