SignaMax 065-7931 User's Guide Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 109
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
Signamax 065-7931 16-Port 10/100/1000BaseT/TX WebSmart Switch
54
4-2-2. Ports Configuration
Function name:
Ports Configuration
Function description:
Port Configuration is applied to change the setting of each port. By using this
configuration capability, you can set/reset the Mode and Flow Control parameters.
These functions are described in detail below.
Parameter description:
Mode:
Sets the speed and duplex mode of the port. If the media is 1 Gbps fiber,
the speed is always 1000 Mbps and the only duplex mode permitted is
full. If the media is TP, the Speed/Duplex is comprised of the combination
of speed mode, 10/100/1000 Mbps, and duplex mode, either full duplex
or half duplex. The following table summarizes the functions the media
supports.
Media type NWay Speed Duplex
1000 M TP ON/OFF 10/100/1000 M Full for all, Half for 10/100
1000 M Fiber ON/OFF 1000 M Full
In Auto-negotiation mode, there is no default value. In Forced mode,
default value depends on your settings.
Flow Control:
There are two modes to choose from in flow control, either Enable or
Disable. If flow control is set to Enable, both parties can send a PAUSE
frame to the transmitting device(s) if the receiving port is too busy to
handle. When it is set Disable, there will be no flow control in the port. It
drops the packet if the traffic is too much to handle.
Default: Enable.
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 108 109

Comments to this Manuals

No comments