SignaMax 065-7840 User's Guide Page 80
- Page / 228
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Signamax 065-7840 24-Port 10/100/1000BaseT/TX Managed Switch
70
3-9. DHCP Boot
The DHCP Boot function is used to spread the request broadcast packet into
a longer time frame to prevent the traffic congestion due to broadcast packets from
many network devices which may seek its NMS, boot server, DHCP server and
many predefined connections when the whole building or block loses electrical
power and then attempts to reboot and recover. When an event like that occurs, a
number of switches or other network devices on the LAN will try their best to find the
server to get the services they require or try to set up the predefined links. In doing
so, they will issue many broadcast packets in the network.
The switch supports a random delay time for DHCP and boot delay for each
device. This suppresses the broadcast storm while all devices are at the booting
stage at the same time. The maximum user-defined delay time is 30 sec. If the
DHCP Broadcasting Suppression function is enabled, the delay time is set randomly,
ranging from 0 to 30 seconds, because the exact delay time is computed by the
switch itself. The default is “Disable”.
Fig. 3-24
- U s e r ’ s G u i d e 1
- Table of Contents 5
- Revision History 8
- About this user’s manual 11
- 1. Introduction 12
- Key Features 13
- 1-2. Checklist 14
- 1-3. Features 14
- 2. Installation 20
- 2-1-2. Cabling Requirements 21
- RS-232 27
- Table 2-3 28
- Ethernet LAN 29
- 2-1-4. IP Address Assignment 30
- 1 0000000 32
- 1 1111111 32
- Fig. 2-11 34
- 2-2. Typical Applications 35
- 3. Operation of 37
- Web-based Management 37
- Page Layout Information 39
- 3-1-1. System Information 41
- 3-1-2. IP Configuration 43
- 3-1-3. Time Configuration 46
- Fig. 3-5 48
- 3-1-4. Account Configuration 49
- 3-2. Port Configuration 50
- Fig. 3-8 53
- 3-2-2. Port Configuration 55
- 3-2-3. Simple Counter 57
- 3-2-4. Detail Counter 59
- ) beside 62
- 3-4. Bandwidth Management 63
- Fig. 3-14 65
- Fig. 3-15 66
- Fig. 3-16 67
- Fig. 3-17 69
- Fig. 3-18 Advanced Mode 73
- Fig. 3-19 Simple Mode 73
- Fig. 3-20 74
- 3-6. SNMP Configuration 75
- 3-7. IGMP Snooping 77
- 3-8. Max. Packet Length 79
- 3-9. DHCP Boot 80
- 3-10. VLAN 81
- Fig. 3-25 82
- Fig. 3-26 83
- 3-10-2. Tag-based Group 84
- Fig. 3-28 85
- Fig. 3-29 85
- 3-10-3. Port-based Group 86
- Fig. 3-31 87
- Fig. 3-32 87
- 3-10-4. Tag Rule 88
- Fig. 3-33 89
- 3-11. MAC Table 90
- Fig. 3-34 91
- Fig. 3-35 92
- Fig. 3-36 93
- Fig. 3-37 94
- 3-12. GVRP Configuration 97
- Fig. 3-40 100
- Fig. 3-41 102
- 3-13. STP Configuration 103
- Fig. 3-42 104
- 3-13-2. STP Configuration 105
- Fig. 3-43 106
- Fig. 3-44 109
- 3-14. Trunking Configuration 110
- 113
- Fig.3-45 113
- Fig.3-46 114
- 3-15. 802.1x Configuration 117
- MAC Enable 118
- Port Authorize 118
- Fig. 3-50 119
- Table 3-3 121
- Fig. 3-52 122
- Disable 123
- 802.1x with Multi-host 123
- Fig. 3-54 124
- ForceUnauthorized: 125
- ForceAuthorized: 125
- Fig. 3-55 126
- 3-16. Alarm Configuration 127
- Fig. 3-56 128
- Fig. 3-57 129
- 3-17. Configuration 130
- 3-17-1. Save/Restore 131
- Fig. 3-61 132
- Fig. 3-62 132
- 3-17-2. Config File 133
- 3-18. Diagnostics 134
- Fig. 3-65 135
- Fig. 3-66 136
- 3-19. TFTP Server 137
- 3-20. Log 138
- 3-21. Firmware Upgrade 140
- 3-22. Reboot 141
- 3-23. Logout 142
- 4. Operation of CLI 143
- Management 143
- 065-7840 144
- 065-7840# 144
- 4-2. CLI Commands 145
- 4-2-1. CLI Global Commands 146
- 4-2-2. CLI Local Commands 152
- system 152
- Argument: 157
- account 158
- mirror 164
- bandwidth 166
- Example: 174
- max-pkt-len 175
- dhcp-boot 177
- mac-table 184
- trunk 197
- 802.1x 201
- alarm 208
- firmware 217
- config-file 218
- hostname 221
- autologout 222
- reboot 222
- 5. Maintenance 223
- Appendix A 224
- Technical Specifications 224
- Hardware Specifications 225
- Appendix B 228
- Null Modem Cable 228
- Specifications 228
Related products and manuals for Network switches SignaMax 065-7840
Network switches SignaMax 065-7931 User's Guide
(109 pages)
(109 pages)
Network switches SignaMax 065-7434 User Manual
(120 pages)
(120 pages)
Network switches SignaMax 065-7727S User's Guide
(287 pages)
(287 pages)
Network switches SignaMax 065-7861 User Manual
(284 pages)
(284 pages)
© 2020, manymanuals.com. All rights reserved. | 1.829 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals