SignaMax 065-7931 User's Guide download pdf (Page 72)

Signamax 065-7931 16-Port 10/100/1000BaseT/TX WebSmart Switch

4-2-6. Aggregation Configuration

The Aggregation (Port Trunking) Configuration is used to configure the

settings of Link Aggregation. You can bundle more than one port with the same

speed, full duplex and the same MAC to be a single logical port, thus the logical port

aggregates the bandwidth of these ports. This means you can apply your current

Ethernet equipment to build the bandwidth aggregation. For example, if there are

three Fast Ethernet ports aggregated in a logical port, then this logical port has

bandwidth three times as high as that of a single Fast Ethernet port.

Function name:

Aggregation Configuration

Function description:

Displays the current setup of Aggregation Trunking. With this function, the

user is allowed to add a new trunking group or modify the members of an

existing trunking group.

Note:

Check the following to avoid errors in configuration:

When configuring the link aggregation function, the user should check that the

aggregated ports are in full-duplex mode as well as whether their speed is the

same or not. The aggregated ports are in the same VLAN group.

Parameter description:

Normal:

Set up the ports that do not join any aggregation trunking group.

Group 1~8:

Group the ports you choose together. Up to 8 ports can be selected for

each group.

Fig. 4-11

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 108 109

No comments

SignaMax 065-7931 User's Guide Page 72