Signamax 065-7931 16-Port 10/100/1000BaseT/TX WebSmart Switch
65
4-2-7. Mirror Configuration
Function name:
Mirror Configuration
Function description:
Mirror Configuration is used to monitor the traffic of the network. For example,
we assume that Port A and Port B are the Sniffer (Monitoring) Port and Source
(Monitored) Port respectively; thus, the traffic received by Port B will be copied
to Port A for monitoring.
Note:
When configuring the mirror function, the user should avoid setting a port to be
a sniffer port and an aggregated port at the same time. It will cause data errors.
Parameter description:
Sniffer Mode:
Used for the activation or de-activation of Port Mirror function; the
switch’s port mirror function supports ingress traffic only. Default is
“disable”.
Sniffer Port:
Sets up the port for monitoring. Valid port is Port 1~16 and default is Port
1.
Source Port:
Sets up the port to be monitored. Just tick the check box (
;) under the
port x; valid ports are Port 1~16.
Fig. 4-12
Comments to this Manuals