SignaMax 065-7931 User's Guide Page 94

  • Download
  • Add to my manuals
  • Print
  • Page
    / 109
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 93
Signamax 065-7931 16-Port 10/100/1000BaseT/TX WebSmart Switch
86
4-4-1-2. TP / Fiber Ports Status
Function name:
TP/Fiber Ports Status
Function description:
Reports the latest updated status of all ports in this switch. Using this function,
the user can view the following settings: link status, speed, and flow control.
All settings are described in detail below.
Fig. 4-25
Parameter description:
Port:
Displays the port number. The number is 1 – 16. Both port 15 and 16 are
optional modules.
Link Status:
Indicates if the link on the port is active or not. If the link is connected to
a properly-working device, the Link status will show the link “Up”;
otherwise, it will show “Down”. This is determined by the hardware
devices on both ends of the connection.
No default value.
Speed:
Displays the speed and duplex mode of all ports. There are three speeds
(10 Mbps, 100 Mbps and 1000 Mbps) supported for TP media, and the
duplex modes supported are half duplex and full duplex. If the media is 1
Gbps fiber, the 1000 Mbps speed is the only one supported. The status
of speed/duplex mode is determined by 1) the negotiation of both local
port and link partner in “Auto Speed” mode or 2) user setting in “Force”
mode. The local port has to have its capability preset
Page view 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 108 109

Comments to this Manuals

No comments