SignaMax 065-7714HSFPTB User Manual download pdf (Page 119)

Hardened Managed Ethernet Switch

User’s Manual 118

Logon to Configure Mode (Configure Terminal Mode).

The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use this command to statically configure a bridge entry to forward matching

frames.

3. Command Syntax:

bridge GROUP address MAC forward IFNAME VLANID

no bridge GROUP address MAC forward IFNAME VLANID

GROUP <1-1> Bridge-group ID used for bridging.

MAC the Media Access Control (MAC) address in the HHHH.HHHH.HHHH

format.

IFNAME the interface on which the frame comes in.

VLANID The VID of the VLAN that will be enabled or disabled on the bridge

<2-4094>.

4. Example:

The following example configures a bridge GROUP (1) to forward matching

frames (MAC address 2222.2222.2222) to the interface fe1 (port 1) in vlan

VLANID (2):

switch_a(config)#bridge 1 address 2222.2222.2222 forward fe1 vlan 2

switch_a(config)#

Static-MAC-Entry Discard:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode).

The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use this command to statically configure a bridge entry to discard matching

frames in a particular VLAN.

3. Command Syntax:

bridge GROUP address MAC discard vlan VLANID

no bridge GROUP address MAC discard vlan VLANID

GROUP <1-1> Bridge-group ID used for bridging.

MAC the Media Access Control (MAC) address in the HHHH.HHHH.HHHH

format.

VLANID The VID of the VLAN on the bridge <1-4094>.

4. Example:

The following example configures a bridge GROUP (1) to discard matching

frames (MAC address 2222.2222.2222) in vlan VLANID (1):

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 177 178

No comments

SignaMax 065-7714HSFPTB User Manual Page 119