SignaMax 065-7714HSFPTB User Manual download pdf (Page 79)

Hardened Managed Ethernet Switch

User’s Manual 78

Add Radius:

1. Add Radius: Click “Add Radius” button. The “Radius Server Setting”

window appears.

2. Radius Server IP: Click in the “Radius Server IP” textbox and specify the

IP address of the remote radius server host.

3. Radius Server Port: Click in the “Radius Server Port” textbox and

specify the UDP destination port for authentication requests. The host is

not used for authentication if set to 0.

4. Secret Key: Click in the “Secret Key” textbox and specify the

authentication and encryption key for all radius communications

between the Switch and radius server. This key must match the

encryption used on the radius daemon. All leading spaces are ignored,

but spaces within and at the end of the key are used. If spaces are used

in the key, do not enclose the key in quotaion marks unless the

quotation marks themselves are part of the key.

5. Timeout <1-1000>: Click in the “Timeout” textbox and specify the time

interval (in seconds) that the Switch waits for the radius server to reply

before retransmitting. Enter a value in the range 1 to 1000.

6. Retransmit <1-100>: Click in the “Retransmit” textbox and specify the

number of times a radius request is resent to a server if that server is not

responding or responding slowly. Enter a value in the range 1 to 100.

7. Submit: Click “Submit” button when you finished Radius Server Setting.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 177 178

No comments

SignaMax 065-7714HSFPTB User Manual Page 79