SignaMax 065-7714HSFPTB User Manual download pdf (Page 164)

Hardened Managed Ethernet Switch

User’s Manual 163

IGMP passive snooping:

Report suppression:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

vlan1.1 means vlan 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface vlan1.1

switch_a(config-if)#

2. Usage:

Use ip igmp snooping report-suppression command to enable report

suppression for IGMP versions 1 and 2.

Use the no ip igmp snooping report-suppression command to disable

report suppression.

3. Command Syntax:

(no) ip igmp snooping report-suppression

4. Example:

The following example enables report suppression for IGMPv2 reports on

vlan1.1:

switch_a(config)#interface vlan1.1

switch_a(config-if)#ip igmp version 2

switch_a(config-if)#ip igmp snooping report-suppression

switch_a(config-if)#

NTP

NTP Status:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode).

The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use ntp enable command to enable NTP for the Switch.

Use no ntp enable command to disable NTP for the Switch.

3. Command Syntax:

(no) ntp enable

4. Example:

The following example enables NTP for the Switch:

switch_a(config)#ntp enable

switch_a(config)#

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 177 178

No comments

SignaMax 065-7714HSFPTB User Manual Page 164