SignaMax 065-7714HSFPTB User Manual download pdf (Page 121)

Hardened Managed Ethernet Switch

User’s Manual 120

Trunking

Port Trunking

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface fe1

switch_a(config-if)#

2. Usage:

Use static-channel-group command to create a static aggregator, or add a

member port to an already-existing static aggregator.

Use the no static-channel-group command to detach the port from the

static aggregator.

3. Command Syntax:

static-channel-group <1-3>

no static-channel-group

<1-3> Channel group number.

Maximum 4 ports in static-channel-group 1 and static-channel-group 2.

Maximum 2 ports in static-channel-group 3

4. Example:

The following example adding the interface fe1 (port 1) to

static-channel-group 1:

switch_a(config)#interface fe1

switch_a(config-if)#static-channel-group 1

switch_a(config-if)#

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 177 178

No comments

SignaMax 065-7714HSFPTB User Manual Page 121