SignaMax 065-7714HSFPTB User Manual download pdf (Page 161)

Hardened Managed Ethernet Switch

User’s Manual 160

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface vlan1.1

switch_a(config-if)#

2. Usage:

Use ip igmp version command to set the current IGMP protocol version on

an interface.

To return to the default version, use the no ip igmp version command.

3. Command Syntax:

ip igmp version VERSION

no ip igmp version

VERSION IGMP protocol version number.

4. Example:

The following example sets the IGMP protocol version 3 on vlan1.1:

switch_a(config)#interface vlan1.1

switch_a(config-if)#ip igmp version 3

switch_a(config-if)#

Fast-leave:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

vlan1.1 means vlan 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface vlan1.1

switch_a(config-if)#

2. Usage:

Use ip igmp snooping fast-leave command to enable IGMP Snooping

fast-leave processing. Fast-leave processing is analogous to immediate

leave processing; the IGMP group-membership is removed, as soon as an

IGMP leave group message is received without sending out a group-specific

query.

Use the no ip igmp snooping fast-leave command to disable fast-leave

processing.

3. Command Syntax:

(no) ip igmp snooping fast-leave

4. Example:

The following example enables IGMP snooping fast-leave on vlan1.1:

switch_a(config)#interface vlan1.1

switch_a(config-if)#ip igmp snooping fast-leave

switch_a(config-if)#

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 177 178

No comments

SignaMax 065-7714HSFPTB User Manual Page 161