SignaMax 065-7714HSFPTB User Manual download pdf (Page 153)

Hardened Managed Ethernet Switch

User’s Manual 152

destination port number (1812):

switch_a(config)#radius-server host 192.168.1.100 auth-port 1812

switch_a(config)#

Secret Key:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode).

The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use this command to set the shared secret key between a Radius server and

a client.

3. Command Syntax:

(no) radius-server host IP-ADDRESS key KEY

IP-ADDRESS A.B.C.D specifies the IP address of the radius server host.

KEY specifies the secret key shared among the radius server and the

802.1x client.

4. Example:

The following example specifies the IP address (192.168.1.100) of the

remote radius server host and set the secret key (ipi) shared among the

radius server and the 802.1x client:

switch_a(config)#radius-server host 192.168.1.100 key ipi

switch_a(config)#

Timeout:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode).

The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use this command to specify the number of seconds a Switch waits for a

reply to a radius request before retransmitting the request.

3. Command Syntax:

radius-server timeout SEC

no radius-server timeout

SEC <1-1000> The number of seconds for a Switch to wait for a server host

to reply before timing out. Enter a value in the range 1 to 1000.

4. Example:

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 177 178

No comments

SignaMax 065-7714HSFPTB User Manual Page 153